Load data for .30 PICRA + .308 | 150gr | Brenneke TIG

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Brenneke TIG
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.076" \| 27.3mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.111" \| 53.6mm
Seated Depth:	0.256" \| 6.5mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B1173_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:13 - 1:11

Load data for 46 loads in caliber .30 PICRA with .308 | 150gr | Brenneke TIG bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	36245	89%	**86	100%
Accurate 4100	<<locked>>	72%	34766	86%	**55	91%
[Accurate No. 11 FS]*	<<locked>>	81%	35360	87%	**68	84%
Accurate TCM	<<locked>>	63%	36347	90%	**52	97%
Alliant 2400	<<locked>>	70%	36100	89%	**75	94%
Alliant BLUE DOT	<<locked>>	73%	36289	89%	**39	99%
[Hodgdon H110]*	<<locked>>	77%	35752	88%	**88	88%
Hodgdon LilGun	<<locked>>	78%	34911	86%	**07	94%
Hodgdon TrailBoss	<<locked>>	95%	24961	61%	**2	100%
Maxam CSB 1	<<locked>>	63%	35157	87%	**29	100%
Ramshot Enforcer	<<locked>>	69%	34867	86%	**62	95%
ReloadSwiss RS 14	<<locked>>	93%	23569	58%	**5	100%
ReloadSwiss RS 30	<<locked>>	93%	35215	87%	**11	91%
SNPE Vectan A0	<<locked>>	63%	35694	88%	**78	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	35099	86%	**52	96%
SNPE Vectan BA7 1/2	<<locked>>	65%	34592	85%	**24	100%
[Somchem S265]*	<<locked>>	85%	36158	89%	**45	87%
Vihtavuori 3N38	<<locked>>	69%	35810	88%	**16	100%
Vihtavuori N105	<<locked>>	71%	35665	88%	**32	100%
Vihtavuori N110	<<locked>>	86%	34766	86%	**68	94%
Vihtavuori N32C Tin Star	<<locked>>	77%	34650	85%	**30	100%
Vihtavuori N350	<<locked>>	64%	36550	90%	**50	100%
[Winchester 296]*	<<locked>>	77%	36376	90%	**17	85%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26527	65%	**42	100%
[Accurate 4100]*	<<locked>>	61%	24323	60%	**65	84%
[Accurate No. 11 FS]*	<<locked>>	77%	30472	75%	**83	80%
Accurate TCM	<<locked>>	61%	34606	85%	**25	97%
[Alliant 2400]*	<<locked>>	61%	27572	68%	**24	89%
Alliant BLUE DOT	<<locked>>	61%	25759	63%	**68	95%
[Hodgdon H110]*	<<locked>>	67%	25338	62%	**01	81%
[Hodgdon LilGun]*	<<locked>>	61%	19232	47%	**02	82%
Hodgdon TrailBoss	<<locked>>	62%	13851	34%	**8	100%
Maxam CSB 1	<<locked>>	61%	32866	81%	**02	100%
Ramshot Enforcer	<<locked>>	61%	26789	66%	**20	90%
ReloadSwiss RS 14	<<locked>>	60%	13155	32%	**1	100%
[ReloadSwiss RS 30]*	<<locked>>	79%	23554	58%	**88	81%
SNPE Vectan A0	<<locked>>	61%	33330	82%	**48	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	14997	37%	**5	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	30661	75%	**65	100%
[Somchem S265]*	<<locked>>	73%	25759	63%	**71	80%
Vihtavuori 3N38	<<locked>>	61%	28253	70%	**98	99%
Vihtavuori N105	<<locked>>	61%	25788	64%	**81	100%
[Vihtavuori N110]*	<<locked>>	63%	17637	43%	**37	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	24642	61%	**9	100%
Vihtavuori N350	<<locked>>	61%	34243	84%	**17	100%
[Winchester 296]*	<<locked>>	73%	31212	77%	**29	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data